Menu

VLF Sinus 62 kV

System probierczy do testów odbiorczych i diagnostyki kabli średniego napięcia

  • Próby wytrzymałości elektrycznej kabli, diagnostyka linii kablowych i lokalizacja dokładna uszkodzeń zewnętrznej powłoki izolacyjnej kabli
  • Najlżejsza i najmniejsza jednostka pomiarowa tego typu dostępna na rynku
  • Automatyczna interpretacja wyników według najnowszej normy IEEE 400.2  
  • Łatwa obsługa systemu w terenie bez potrzeby użycia zewnętrznego komputera

VLF Sinus 62 kV to wielofunkcyjny urządzenie pomiarowe. System umożliwia nie tylko wykonanie prób wytrzymałości elektrycznej układów izolacyjnych linii kablowych napięciem wolnozmiennym sinusoidalnym, prostokątnym kosinusowym i stałym, ale również wykonywanie badań szczelności i lokalizacji dokładnej uszkodzeń zewnętrznej powłoki izolacyjnej kabli (z zastosowaniem miernika napięcia krokowego ESG NT). Opcjonalny wewnętrzny moduł pomiarowy współczynnika strat dielektrycznych tangens delta zwiększa możliwości diagnostyczne systemu.

Obsługa urządzenia w terenie nie wymaga użycia zewnętrznego komputera. System wyposażony jest w intuicyjne oprogramowanie i pojemną pamięć. Dane można eksportować poprzez złącze USB i przetwarzać w celu tworzenia spersonalizowanych raportów w oprogramowaniu komputerowym Easyprot (dostarczanym w zestawie). Użytkownik może przeglądać i analizować pomiary zarówno bezpośrednio po ich przeprowadzeniu, jak również – po pobraniu z pamięci urządzenia – w dowolnym czasie.

Zestaw VLF Sinus 62 kV z wbudowanym, opcjonalnym modułem tangens delta to solidnie wykonany, kompaktowy, przenośny system probierczy przeznaczony do przeprowadzania prób wytrzymałości elektrycznej oraz diagnostyki izolacji kabli średniego napięcia.

Dane Techniczne
Przewodnik techniczny
MeggerBook Cable Brochure
MeggerBook & MeggerBook Lite
MeggerBook & MeggerBook Lite Software Version 3.4.0

 

A lot is new in version 3.4.0:

•              Clear and chronologically ordered activity history

•              Dedicated timeline view for single cable

•              Modern UI with two themes

•              Compatibility with the new generation of test vans (updates also available) and VLF testers

•              Possibility to define own evaluation criteria for VLF tests and TanDelta measurements

•              Cable condition assessment

•              Top-notch search and filter functions

•              Custom curve colours

•              PDF import

•              Database backup solution

•              Improved cable editor

•              Cable route can now be drawn on map

•              Additional diagram and marker functions

•              Improved report page navigation

•              Improved distance filtering

•              Simplifications in license activation and management

•              JSON file importing improved.

•              Improved scaling of PDF preview

 

The setup file below is suitable for the installation of both MeggerBook (full version) and MeggerBook Lite (free limited version).

 

When started with after adding the electronic license key into the installed software, the software starts as MeggerBook full version which allows for easy and comprehensive data evaluation, data archiving, cable management and report creation. A personal quotation for a certain number of licenses can be requested here . The new electronic license key allows for 3 devices to have MeggerBook full version installed on them.

 

The dongle key licenses from older versions of MeggerBook are not supported with this newer version. Updated electronic license keys can be requested here for previous customers.

 

Without the required software license key the software starts as MeggerBook Lite which allows for seamless report creation and offers some of the features as the full version while limiting the data storage options as follows:

 

•  Measurements, analyses and reports are not permanently stored in the database

•  While cable import and storage are not limited, a maximum of 5 cables can be created using the cable editor  of the Lite Edition

 

At this time, the software can handle the measurement and test data of the following Megger devices:

 

Test vans:            Centrix, Centrix City, Compact City, R30, Variant

Test systems:     VLF Sine Wave 45 / 62, VLF CR 40/60, TDS 40/60

TDRs:                     Teleflex VX(-P), Teleflex SX

 

Note for test systems VLF Sine Wave 45 and VLF Sine Wave 62:

 

Data of these test systems can only be imported into the software, if the test systems is equipped with firmware version 3.14 or higher. The latest firmware can be found here (VLF Sine Wave 45) and here (VLF Sine Wave 62).

 

MeggerBook_3-4-0.zip
119,5 MB | 14-09-23
MeggerBook Lite Edition Quick Guide
MeggerBook_lite-version.pdf
525,4 KB | 12-06-23
VLF Sinus 62 Firmware

Important: When upgrading from a firmware version <3.14 make sure to export all the test data you may still need for reporting purposes to a USB flash drive. Due to a change in the data format, old data will not be available for export after the update!

Installation instructions:

1. Extract the zip archive to the root folder of your USB flash drive.

2. Plug the USB flash drive in your VLF Sinus test system and turn it on.

3. Access the system menu via themenu item.

4. Select themenu item. The USB flash drive is scanned for appropriate firmware and language files which are then offered for selection.

5. Scroll down and select the application file (.img). The firmware update starts and may take a few minutes.

6. After the update has been finished, the system reboots automatically.

7. Perform steps 3 to 4 again to install your preferred language file(s).

VLF Sinus 62 Firmware

Only for use with the non-touchscreen version of the instrument

VLFSinus62_3-19.zip
31,4 MB | 03-07-23
VLF Sine Wave 62 V3 Firmware (touch-display version)

Please follow manual for installation instructions.

VLF Sine Wave 62 V3 Firmware (touch-display version)
Firmware_VLFSIN62_V3.zip
1,9 MB | 10-10-23